Skip to product information
1 of 13

Flux - CONVERTER Adapter | upto 10 feet | W

Flux - CONVERTER Adapter | upto 10 feet | W

SKU:2inchFbAC_FLUX

Regular price £12.90 GBP
Regular price Sale price £12.90 GBP
Sale Coming Soon!
Shipping calculated at checkout.
Control Box

Cut End of LightStrip
>
Offcut of LightStrip

Start of LightStrip Connector
?
Other Cables
This is a custom, made-to-order Converter Cable for the Philips Hue Flux LightStrip. It lets you connect an offcut directly to the Control Box. You can choose a short 4 inch piece, or add some length between the Control Box and your first LightStrip.

The cable also comes with an optional male-to-male pin strip, so you can use it from the end of a LightStrip into the connector on the white cable attached to the start of the LightStrip.

This cable is made with the correct connectors for the Philips Hue Flux LightStrip system, for perfect performance and lasting reliability.
Dimensions


< Choose the Length >
These cables are made to order, to your exact length. If the length you need isn't in the options, just choose the next length up and let us know your exact measurement.

Unlike other Philips LightStrips, which are controlled by power to each of the five LED colours, Flux LightStrips are controlled by data. Because power is delivered through a single core, resistance can affect performance. This is why the cable lengths are more limited than for other LightStrips. Please don't join cables together, as the longest length on offer is the longest that will work without issues.

This mainly applies to cables plugged directly into the Control Box. It is less of a problem when you are using cables to connect different sections of LightStrip together.

All of the cables work, but if they're too long for the setup, they create too much resistance, which can make the LightStrip flash or blink at random. In our tests, the combinations shown with a tick work well, and those with a cross will flicker.
⚠️ Length compatibility chart
Standard Flux LightStrip
LightStrip Length
Cable Length
Flux Ultra Bright LightStrips
LightStrip Length
Cable Length
There's no exact formula for what will and won't work in every setup. This is why you can return these free of charge if they don't suit your particular needs.
Fitting Instructions
1. Please switch off the LightStrip at the wall before plugging these cables in. The Control Box calibrates to new cables and Extension LightStrips when it's powered on, so it knows how far to spread the gradient.

2. Where it suits your setup, cut the LightStrip straight across the cut line.

3. Make sure the snap connector is on its back, with the curved side facing down.

4. Open the small clip (the one with the small LED symbol).

5. Push the upside-down LightStrip onto the connector, taking care that the pins don't go under the contacts on the LightStrip. Most of the time it will go on without any issues. Occasionally, it may need reseating.

6. Close the clip with a firm snap.

Unlike 6-pin LightStrips, 4-pin LightStrips only work in one direction. You can tell which way round by the larger black chip, which sits towards the end of each cut section. The start of each section doesn't have this chip. You cannot connect two starts or two ends together.

When you plug the small connector into a Control Box (as a female connector, with the four male-to-male pins removed), the chip on the LightStrip should usually be furthest away from the snap connector. When you plug the small connector (as a male connector) into the white cable attached to the start of the LightStrip, the chip should be closest to the snap connector.

7. Plug the other end of the cable into the Control Box. If you are using it as a male connector, plug it into the connector on the white cable attached to the start of the LightStrip.

8. When your setup is complete, plug the LightStrip back in. The LightStrip will calibrate, and you should see the connected sections light up. If a section doesn't work, the snap-on connector may need reseating. Please power off at the wall before doing that. Once it's all done, sit back and bask in the light.

If you're having trouble, follow these troubleshooting steps →
Compatibility
There are now many versions of the Philips Hue LightStrip, and many of them use different connectors. Most versions have two different-sized connectors: the Control Box socket and the LightStrip extension connector. That makes three different point-to-point cable combinations for each version, so dozens of combinations in total, plus splitters, all for different purposes.

As all of our cables are made to order, please double-check the diagrams and description before purchasing, to be sure this cable is compatible with your LightStrip, setup and needs.


View full details